深林舞会


Your present location: Food Machinery Equipment Network > News Home > Industry News

Operation and Maintenance of "Bai Mai" Automatic Blow Molding Machine

December 31, 2019 11:07:18 Source: Food Machinery Equipment Network Editor: Mary Popularity: 9864


[ Industry News of Food Machinery and Equipment Network ] In recent years, the development of pneumatic technology has been quite rapid. Automatic bottle blowing machines have been favored by food and beverage processing enterprises. With the maturity of technology and the needs of industrial development, it has also been widely used in fields such as biology and medicine, and has ushered in development opportunities. It is true that under normal circumstances, many people use the automatic blow molding machine for a period of time, and there are some problems with the blow molding machine, and they feel that there is a fault. This is also a place where many users are very confused. In this regard, industry technicians answered their questions.

According to reports, the automatic bottle blowing machine is a blow molding process that uses the wind blown by the machine to blow plastic particles (softened into a liquid) or preforms that are made into a certain shape of the mold cavity, and then blow into a hollow bottle. device of. Compared with most of the previous manual bottle blowing machines, the bottle blowing machine has high bottle blowing efficiency, high speed, and labor cost savings. At the same time, it uses oil-free airbag clamping technology, which has a large clamping force, and has less stress and long life during the operation of the toggle To ensure the quality of the blowing bottle.
Some technicians have stated that the correct and standardized operation and regular maintenance of the automatic blow molding machine is a prerequisite to ensure its normal work. Under normal circumstances, many people use the automatic blow molding machine for a period of time, the bottle blowing machine has some problems, and feels that there is a fault, which is also a place where many users are very confused.
In this regard, there are technicians to help users "blood pulse" automatic bottle blowing machine, from analysis and operation and regular maintenance to provide analytical solutions to ensure the normal operation of the equipment, to relieve users of the bottle blowing machine existing faults.
In terms of correct and standardized operation, it is recommended that the user place the preform in a preform container and automatically enter the preform positioning device through the conveying system. After that, the preform mouth is automatically loaded on the preform holder and then sent to the drying tunnel.
When heated, the preform is sent to the blow-pull platform, then the mold is locked, and then the low-pressure blow-pull, high-pressure blow-pull, exhaust, and finally mold opening and automatic demolding. Note that during the operation of the machine, it is strictly forbidden for the blower to put his hand into the mold when placing the blank and taking the bottle.
From the perspective of maintenance, first of all, the user should regularly perform maintenance on the automatic blow molding machine. Usually after the peak season of production, it is necessary to carry out a large maintenance on the automatic blow molding machine once, and perform detailed maintenance time and precautions such as cleaning the mold clamping device, adding lubricant, and cleaning the mold.
Secondly, when repairing the automatic blow molding machine, remember to press the touch screen fault repair button to ensure safe maintenance. If you need to manually observe the movement of each cavity individually, please pay attention to the position of the robot arm. At the same time, be sure to understand the role of the separate button before operating, to ensure that misoperation causes equipment failure, which affects the service life of the automatic blow molding machine.
In addition, the user should check whether your exhaust time setting, mold, and exhaust valve are normal to ensure that the bottle can be removed from the mold after blowing. Make sure that the exhaust setting is normal, which will reduce the failure of just blowing a bottle each time. The user opens the mold and manually opens and closes the mold. If it is normal, run it in dry running state. There is also an exhaust valve. The user opens the exhaust valve and checks the condition of its springs and seals. If abnormal, it should be handled in time to ensure the quality of the equipment.
Finally, the blow molding machine is thoroughly cleaned, including nozzle caps, suction filters, nozzles to suction pipes, filter caps, etc. After washing with water, flush it with air from the compressor, and remove the cap nut that fixes the suction pipe, and clean the inside of the metal parts and the inside of the pipe. Note that water should not be splashed on the electrical parts during cleaning, so as to avoid short circuit, leakage, motor burnout and other faults.

I want to comment

Civilize the Internet and speak rationally. (You can also enter 200 characters)
expression

All comments represent the opinions of netizens and have nothing to do with this stand.

  • All works marked “Source: Food Machinery and Equipment Network” on this website are works that Zhejiang Xingwang Baomingtong Network Co., Ltd.-Food Machinery and Equipment Network legally owns copyright or have the right to use. Excerpt or use the above works in other ways. Those who have authorized the use of works on this website shall use them within the scope of authorization and indicate "Source: Food Machinery Equipment Network". Anyone who violates the above statement will be held accountable for related legal responsibilities.
  • This website reprints and indicates works from other sources (non-food machinery and equipment network) for the purpose of transmitting more information. It does not mean that this website agrees with its views or is responsible for its authenticity. Direct and joint liability. When other media, websites or individuals reprint from this website, they must retain the first source of the works indicated on this website and bear their own legal responsibilities such as copyright.
  • If you (unit or individual) believes that a part of the content of this website is suspected of infringement, please notify us immediately and provide true and effective written certification. We will take effective measures to prevent the occurrence of infringement and take appropriate measures after verification .
Scan QR code to follow WeChat
@ 食品 机械 设备 网
Recommended
0

  • 右2
  • 广告招租








    Illustrated food machine

    More >>
    Visited Shanghai Bozhuo Packaging Machinery Co., Ltd.

    Visited Shanghai Bozhuo Packaging Machinery Co., Ltd.


    Substation

    Food Packaging Machinery Net Food Meat Processing Net Food Beverage Machinery Net Snack Food Equipment Net Food Rice Noodle Machinery Net Food Bakery Net Net Food Fruit & Vegetable Net Net Food Refrigeration Net Net Food Drying Net Net Water Treatment Net Net Food Delivery Net Products Equipment Net Cooking Equipment Net Pastry Equipment Net Slaughter Machinery Net

    Food Machinery Micro Portal


    About Us | Site Services | Member Services | Enterprise Websites | Owned Websites | Friendly Links | Recruitment of Talents | Browse Product Categories | Product Sitemap | Special Channel List

    Food Machinery Equipment Network -Professional online media for the food machinery industry

    Copyright 2020 nongye168.cn All Rights Reserved Legal Adviser: Lawyer Jia Ximing of Zhejiang Tianlu Law Firm

    Customer Service Hotline: 0571-87759911 Join hotline: 0571-87858616 Exhibition cooperation: 0571-87759655

    Customer Service Department: Editorial Department: Cooperation Department: Marketing Department:

    Back to Home