深林舞会

| Register | Products | Favorite the shop

Industry products

18610279002
current position:
Casele (Beijing) Technology Development Co., Ltd. >> Technical Articles >> What are the points of attention when using saline injection machine

Product Category Brand Category

More categories

What are the important points for using a saline injection machine?

Read: 740 Release time: 1/2/2020
The structure design of brine injection machine has the characteristics of advanced and reasonable, stable performance, high reliability, strong production capacity, low noise, advanced electrical system, high technical content, low failure rate, high insulation level, energy saving and consumption reduction.
Work flow of injection machine:
When the device is working, the meat block is moved forward by the conveyor belt. When the injection needle moves down to the midpoint, the conveyor belt stops moving, the pressure plate presses the meat block, the injection needle penetrates the meat block and continuously injects water until the setting Time, when the injection needle returns to the midpoint of the stroke, the meat supply conveyor begins to move forward, driving the movement of the meat mass, and iterating.
Maintenance and maintenance of saline injection machine:
1.Check whether each department is normal before starting up
2. Lubricate each lubricating part in time according to regulations.
3. After the work of each shift must be done with warm water, turn on the pump to flush the needle tube and the needle for 15-20 minutes, and clean the filter according to the injection situation in each shift.
4. The power must be cut off after the work is completed
5. Scrub the whole machine with warm water to clean it.
Points to note when using a saline injection machine :
1. Pour the prepared juice into the material cart through the filter. Then push the material cart into the abdomen of the fuselage and connect the water inlet pipe of the pump. Turn on the power.
2. Check whether the machine is running normally. Normal operation means that when the conveyor belt goes forward, the needle goes down.
3. After normal operation, you can inject. (Before starting the injection, start slowly and then start the pump.) Check whether the water supply of the pump is normal.
4. Put the meat on the conveyor belt and arrange it evenly. Be careful not to put the meat in the gaps on both sides of the chain, so as not to block the sprocket and affect the use.
Why are saline injection machines widely used? Saline injection can choose processing equipment according to its own processing conditions or processing output, such as mechanical injection machines and pneumatic injection machines, and some injection machines have a frequency conversion function according to process requirements. Therefore, when choosing customized processing equipment, it is necessary to meet its own requirements, simple and convenient, and also to meet various processes. Therefore, the application of the injection machine in the field of meat product processing is more extensive and complete.

Favorite the shop

Please log in before collecting

prompt

Your message has been submitted successfully! We will reply you as soon as possible ~
product comparison QR code Feedback online chating
Leave message