深林舞会

Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd.

Main Products: Plastic containers and various packaging materials testing equipment

Your present location: Home > Download > How to test the flatness of the canned food bottle mouth

company information

Contact:
Sanquan Nakaishi
Address:
16th floor, Quanjing Yayuan Business Building, Shizhong District, Jinan City, Shandong Province
Postcode:
252000
Shop:
http://nongye168.cn/st165647/
Leave him a message

How to test the flatness of the canned food bottle mouth

2018/7/16 16:50:45 Reading (13177)

Provider Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. Data size 241.2KB
Profile picture [Click to view] download times 256 times
Data type JPG picture Views 13177 times
【Detailed description】

Food canned bottle mouth flatness tester is a testing instrument with high customer satisfaction. Sanquan Zhongshi always pays attention to details and does not miss a screw, and strives to make customers impeccable. sumspring Sanquan Zhongshi trusted packaging testing equipment brand.

Food canned bottle mouth flatness tester

Food canned bottle mouth flatness tester

Food canned bottle mouth flatness tester is equipped with high-speed processing chip, professional testing software, touch screen control, fast running speed, convenient operation, convenient and practical, and guarantees the integrity and standardization of data.

Now the entire market is entering the era of intelligence. For food canned bottle packaging, it also faces the opportunities and challenges brought by intelligence. Below we will talk about some concrete manifestations of the flatness of the canned food bottle mouth in intelligent production;

1. Food canned bottle filling: The full-automatic production line has higher requirements for the verticality of the bottle, and the verticality is the guarantee of uniform filling. Otherwise, bottle dumping will occur, affecting the production process.

2. Food canning bottle capping, bottle verticality and flatness of the mouth have a significant impact on the quality of the capping. When the flatness of the bottle mouth is poor, tilting of the cap, gaps, and poor sealing may occur.

How to test the flatness of the canned food bottle mouth?

1. Food canned bottle bottle flatness tester test principle: Just fix the bottom of the bottle on the rotating plate of the horizontal plate, make the bottle mouth contact the dial indicator, rotate 360 ° to read the maximum value and the minimum value. Value, 1/2 of the difference between the zui large value and the zui small value is the vertical axis deviation value.

2. Test method for flatness of canned food bottle mouth:

(1) Canned food bottles are clamped on a horizontal rotating chassis, so that the bottle mouth is in contact with the dial indicator,

(2) Rotate 360 ° to read the large and small values, and the 1/2 of the difference between the large and small values is the vertical axis deviation value.

(3) When using a base plate with a V-shaped block, place the sample against the V-shaped block, apply a downward pressure to the sample at a direction of 45 ° to the horizontal plane when measuring, and rotate the glass bottle can 360 °.

(4) Make a note of the large and low distances between the outside of the edge of the bottle mouth and the fixed point. The vertical axis deviation is half the difference between the measured large and small values.

(5) The accuracy of the measured value should not be less than 0.1mm.

(6) Correct the vertical axis deviation obtained from the actual measurement according to the accuracy.

Food canned bottle mouth flatness tester meets the QS certification requirements of the food industry. No matter from the national level or from various rectification actions, food packaging safety should be worthy of attention from manufacturers. Food can manufacturers should pass self-examination and find Problem, and then solve the problem, so as to smoothly respond to QS certification.



Product comparison QR code

Scan to visit mobile phone shops
Leave message